Style paragraph

This page describes how you can style text for your paragraph. To set paragraph-level styling, you can configure parameters like textAlign and lineHeight or define your own ParagraphStyle.

Set text alignment

The textAlign parameter lets you set the horizontal alignment of the text within a Text composable surface area.

By default, Text will select the natural text alignment depending on its content value:

• Left edge of the Text container for left-to-right alphabets such as Latin, Cyrillic, or Hangul
• Right edge of the Text container for right-to-left alphabets such as Arabic or Hebrew

@Composable
fun CenterText() {
    Text(
        "Hello World", textAlign = TextAlign.Center, modifier = Modifier.width(150.dp)
    )
}
TextSnippets.kt

If you want to manually set the text alignment of a Text composable, prefer using TextAlign.Start and TextAlign.End instead of TextAlign.Left and TextAlign.Right respectively, as they resolve to the right edge of the Text composable depending on the preferred language text orientation. For example, TextAlign.End aligns to the right side for French text and to the left side for Arabic text, but TextAlign.Right aligns to the right side no matter what alphabet is used.

Add multiple styles in a paragraph

To add multiple styles in a paragraph, you can use ParagraphStyle in an AnnotatedString, which can be annotated with styles of arbitrary annotations. Once a portion of your text is marked with a ParagraphStyle, that portion is separated from the remaining text as if it had line feeds at the beginning and end.

For more information about adding multiple styles in a text, see Add multiple styles in text.

AnnotatedString has a type-safe builder to make it easier to create: buildAnnotatedString. The following snippet uses buildAnnotatedString to set ParagraphStyle:

@Composable
fun ParagraphStyle() {
    Text(
        buildAnnotatedString {
            withStyle(style = ParagraphStyle(lineHeight = 30.sp)) {
                withStyle(style = SpanStyle(color = Color.Blue)) {
                    append("Hello\n")
                }
                withStyle(
                    style = SpanStyle(
                        fontWeight = FontWeight.Bold, color = Color.Red
                    )
                ) {
                    append("World\n")
                }
                append("Compose")
            }
        }
    )
}
TextSnippets.kt

Adjust line height and padding

includeFontPadding is a legacy property that adds extra padding based on font metrics at the top of the first line and bottom of the last line of a text. Starting from Compose BOM version 2024.01.01, includeFontPadding is set to false by default, which brings the default text layout more in line with common design tools.

The ability to configure lineHeight is not new– it has been available since Android Q. You can configure lineHeight for Text using the lineHeight parameter, which distributes the line height in each line of text. You can then use the new LineHeightStyle API to further configure how this text is aligned within the space, and remove whitespace.

You may want to adjust lineHeight using the text unit "em" (relative font size) instead of "sp" (scaled pixels) for improved precision. For more information about selecting an appropriate text unit, see TextUnit.

Text(
    text = text,
    style = LocalTextStyle.current.merge(
        TextStyle(
            lineHeight = 2.5.em,
            platformStyle = PlatformTextStyle(
                includeFontPadding = false
            ),
            lineHeightStyle = LineHeightStyle(
                alignment = LineHeightStyle.Alignment.Center,
                trim = LineHeightStyle.Trim.None
            )
        )
    )
)
TextSnippets.kt

In addition to adjusting lineHeight, you can now further center and style text using configurations with the LineHeightStyle API: LineHeightStyle.Alignment and LineHeightStyle.Trim (includeFontPadding must be set to false for Trim to work). Alignment and Trim use the measured space in between lines of text to more appropriately distribute it to all lines– including a single line of text and the top line of a block of text.

LineHeightStyle.Alignment defines how to align the line in the space provided by the line height. Within each line, you can align the text to the top, bottom, center, or proportionally. LineHeightStyle.Trim then allows you to leave or remove the extra space to the top of the first line and bottom of the last line of your text, generated from any lineHeight and Alignment adjustments. The following samples show how multi-line text looks with various LineHeightStyle.Trim configurations when alignment is centered (LineHeightStyle.Alignment.Center).

LineHeightStyle.Trim.None	LineHeightStyle.Trim.Both
LineHeightStyle.Trim.FirstLineTop	LineHeightStyle.Trim.LastLineBottom

See the Fixing Font Padding in Compose Text blog post to learn more about the context of this change, how includeFontPadding worked in the View system, and the changes made for Compose and the new LineHeightStyle APIs.

Insert line breaks

The LineBreak API defines the criteria by which text is split across multiple lines. You can specify the type of line breaking you want in the TextStyle block of your Text composable. The preset line breaking types include the following:

• Simple — Fast, basic line breaking. Recommended for text input fields.
• Heading — Line breaking with looser breaking rules. Recommended for short text, such as titles.
• Paragraph — Slower, higher-quality line breaking for improved readability. Recommended for larger amounts of text, such as paragraphs.

The following snippet uses both Simple and Paragraph to specify line-breaking behavior on a long block of text:

TextSample(
    samples = mapOf(
        "Simple" to {
            Text(
                text = SAMPLE_LONG_TEXT,
                modifier = Modifier
                    .width(130.dp)
                    .border(BorderStroke(1.dp, Color.Gray)),
                fontSize = 14.sp,
                style = TextStyle.Default.copy(
                    lineBreak = LineBreak.Simple
                )
            )
        },
        "Paragraph" to {
            Text(
                text = SAMPLE_LONG_TEXT,
                modifier = Modifier
                    .width(130.dp)
                    .border(BorderStroke(1.dp, Color.Gray)),
                fontSize = 14.sp,
                style = TextStyle.Default.copy(
                    lineBreak = LineBreak.Paragraph
                )
            )
        }
    )
)
TextSnippets.kt

In the above output, notice that the Paragraph line breaking behavior produces a more visually balanced result than the Simple line breaking.

Customize line breaks

You can also construct your own LineBreak configuration with the Strategy parameter. The Strategy can be any of the following:

• Balanced — Attempts to balance the line lengths of the text, also applying automatic hyphenation if enabled. Recommended for small screens, like watches, to maximize the amount of text displayed.
• HighQuality — Optimizes a paragraph for more readable text, including hyphenation if enabled. (Should be a default for everything that's not Balanced or Simple.)
• Simple — basic, fast strategy. If enabled, hyphenation is done only for words that don't fit on an entire line by themselves. Useful for editing text to avoid changing positions while typing.

The following snippet shows the difference between a paragraph with default settings and a paragraph optimized for small screens with the Balanced line-breaking strategy:

TextSample(
    samples = mapOf(
        "Balanced" to {
            val smallScreenAdaptedParagraph =
                LineBreak.Paragraph.copy(strategy = LineBreak.Strategy.Balanced)
            Text(
                text = SAMPLE_LONG_TEXT,
                modifier = Modifier
                    .width(200.dp)
                    .border(BorderStroke(1.dp, Color.Gray)),
                fontSize = 14.sp,
                style = TextStyle.Default.copy(
                    lineBreak = smallScreenAdaptedParagraph
                )
            )
        },
        "Default" to {
            Text(
                text = SAMPLE_LONG_TEXT,
                modifier = Modifier
                    .width(200.dp)
                    .border(BorderStroke(1.dp, Color.Gray)),
                fontSize = 14.sp,
                style = TextStyle.Default
            )
        }
    )
)
TextSnippets.kt

CJK considerations

You can also customize LineBreak with the Strictness and WordBreak APIs, which were designed specifically for CJK languages. You may not always see the effects of these APIs in non-CJK languages. Overall, line-breaking rules are defined based on locale.

Strictness describes the strictness of the line breaking with the following properties:

• Default — Default breaking rules for the locale. May correspond to Normal or Strict.
• Loose — The least restrictive rules. Suitable for short lines.
• Normal — The most common rules for line breaking.
• Strict — The most stringent rules for line breaking.

WordBreak defines how line breaks should be inserted within words with the following properties:

• Default — Default breaking rules for the locale.
• Phrase — Line breaking is based on phrases.

The following snippet uses a Strict strictness and a Phrase word breaking setting for a Japanese text:

val customTitleLineBreak = LineBreak(
    strategy = LineBreak.Strategy.HighQuality,
    strictness = LineBreak.Strictness.Strict,
    wordBreak = LineBreak.WordBreak.Phrase
)
Text(
    text = "あなたに寄り添う最先端のテクノロジー。",
    modifier = Modifier.width(250.dp),
    fontSize = 14.sp,
    style = TextStyle.Default.copy(
        lineBreak = customTitleLineBreak
    )
)
TextSnippets.kt

Hyphenate text split across lines

The Hyphens API lets you add hyphenation support to your app. Hyphenation refers to inserting a dash-like punctuation mark to indicate that a word is divided across lines of text. When enabled, hyphenation is added between the syllables of a word at appropriate hyphenation points.

By default, hyphenation is not enabled. To enable hyphenation, add Hyphens.Auto as a parameter in a TextStyle block:

TextSample(
    samples = mapOf(
        "Hyphens - None" to {
            Text(
                text = SAMPLE_LONG_TEXT,
                modifier = Modifier
                    .width(130.dp)
                    .border(BorderStroke(1.dp, Color.Gray)),
                fontSize = 14.sp,
                style = TextStyle.Default.copy(
                    lineBreak = LineBreak.Paragraph,
                    hyphens = Hyphens.None
                )
            )
        },
        "Hyphens - Auto" to {
            Text(
                text = SAMPLE_LONG_TEXT,
                modifier = Modifier
                    .width(130.dp)
                    .border(BorderStroke(1.dp, Color.Gray)),
                fontSize = 14.sp,
                style = TextStyle.Default.copy(
                    lineBreak = LineBreak.Paragraph,
                    hyphens = Hyphens.Auto
                )
            )
        }
    )
)
TextSnippets.kt

When enabled, hyphenation only occurs under the following conditions:

• A word does not fit onto a line. If you use a Simple line breaking strategy, the hyphenation of a word occurs only if a line is shorter than the single word.
• The appropriate locale is set on your device, as appropriate hyphenation is determined using dictionaries present on the system.